PDMS Commands

 

 To Open Command Window In PDMS

 Go to Display ==> Command Window.

Type a Command (Sometimes have Selection on Current Element) & Press Enter.

 PDMS Commands

General Commands:

1.   SAVEWORK - To Save Current Work

2.   AXES OFF - Axes Switch Off

3.    ADD CE - Add Current Element To Display

4.    REM ALL ADD CE - Remove All From Display And Add Current Element.

5.   ALP REQ CLEAR - Clear The Command Line

6.   REM ALL - Remove All From Display

7.   REPR HOLES ON UPDATE - Holes Representation On & Update In Graphical Window.

8.   REPR HOLES OFF UPDATE - Holes Representation Off & Update In Graphical Window

9.   Q ATT - To Display The Attributes Of The Current Element

10. STAT - To Display The Status

11. UNCLAIM ALL - Unclaiming All To Allow The Other User To Work.

12. Q POS $Q - Help

13. MARK CE - To Display The Name Of The Component Of The Element.

14. UNMARK ALL - To Remove All The Markings From The Graphical Window

15. ENHANCE CE COL RED - To Change The Color Of The Current Element

16. REN /NAME COPY PREV - Copy And Rename The New Component

17. QUIT - Exits The Pdms Application Without Saving

18. FINISH - Exits The Pdms Application With Saving

19. Q MDB - Display The Current Multiple Database

20. Q USER - Display The Current User Name

21. Q MEM - Display The Members Of Current Site/Zone/ .. Etc.

22. F1 - Help

23. F2 - Zoom In/Out

24. F3 - Pan

25. F4 - Perspective/Parallel View

26. F5 - Rotate

27. F6 - Walk On/Off

28. F7 - Rotate Wrt Eye/Model

29. F8 - Wire Frame/Solid

30. F9 - Scroll Bar On/Off

31. F1&F3 - Zoom In

32. F7&F9 - Zoom Out

33. F4/LEFT ARROW - Pan/Rotate Left

34. F6/RIGHT ARROW - Pan/Rotate Right

35. F2/DOWN ARROW - Pan/Rotate Up

36. F8/UP ARROW - Pan/Rotate Bottom

37. $M - For Loading A Macro File (Project Data)

38. ADD ALL WITHIN VOL CE 1000 - All The Components With In The 1000 Distance All Around The Ce

39. Q ATT IDP@ - For Getting The Position Of A Current Element

40. AXES AT IDP@ - Places The Axes At The Current Element P-Point

41. AXES ON - Make The Axes To Display

42. CHOO ALL - Reselect

43. DIR N 45 E - To Orient The Component In The Direction Of N 

44. Q IDP@ WRT /*  - Details With Respect To World

45. NEW EQUI / COPY / - For Copying & Renaming An Equipment As New

46. THRO CE - Through Current Element

47. REPR OBST ON UPDATE - Make The Obstruction Area To Display

48. LOCK ALL - Lock Any Hierarchiy

49. MATCH WITH (NAME,'*ABC*') - Rule For Making Mto Report

50. Q MEM - To Query The Member

51. Q OWN - To Query The Owner

52. THRO ID@ - Through Id Cursor At

53. THRO IDP@ - Through Id "P" Point

54. Q U IN /* - To Find The Elevation Of Origin With Respect To World

55. Q SESSION - To Find Out Mdb, Update Date, User Name

56. Q TEMP - To Query The Temperature

57. REM ALL  - To Remove All From Display

58. Q DRAWLIST - Summary Of The Site

59. Q NAME - To Find The Selected Object Name

60. Q XYPOS - To Know The Xy Position Of The View

61. UPDATE ALL - To Update The All Views Of The Sheet As Per The Design Modification.

62. AT @ - For Relocating The View

63. BY @ - For Relocating The View With Base Point

64. LVISI T - View Display On

65. LVISI F - View Display Off

66. LFRA T - Borders Of View On

67. LFRA F - Borders Of View Off

68. DTOFFSET - For Moving Dimtext Location

69. PLTXT - Projection Line Text

70. PLTXT '#DIM-0' - For Giving The Nozzle Orientation

71. PLTXT '-C OF #OWN(C2:)' - To Mark Center Line Of Equipment.

72. PKDIST - Clearance From The Origin

73. PKEY TOS - Set The Extension Line As Tos

74. PLTXT 'BOP EL+ #POSU(C2:)' - To Mark Bop Of Pipe

75. PLTXT 'TOS EL+ #POSU(C2:)' - To Mark Tos Of Structure

76. NEW GLAB COPY PREV DDNM ID@ - Copy Previous Tag

77. BTEXT '#NAME (C2:)' - For Changing Lable Text (Use Required Option In Place Of Name)

78. SPREAD REMOTE - For Spreading The Lable Tags Outside The View Limits.

79. ADEGREES 90 - To Rotate The Lable Tag By 90 Deg.

Piping Commands:

1.   DELETE BRAN - Delete Branch

2.   Q HSTU - To Display Branch Head Side Tube Attributes

3.   Q LSTU - To Display Component Leave Side Tube Attributes

4.   Q ABORE  - To Display Arrive Bore Of A Component

5.   Q LBORE - To Display Leave Side Bore Of A Component

6.   ADD HREF TREF - Add Head & Tail Reference

7.   Q HBORE - To Display The Head Side Bore Of A Branch

8.   Q TBORE - To Display The Tail Side Bore Of A Branch

9.   Q SPRE - To Display The Specification Of The Component

10. Q PSPEC - To Display The Specification Of The Pipe

11. NEW ELBO CHOO - Create New Elbow

12. NEW ELBO SEL WITH STYP EA - To Create The Elbow With Specific Selection Type

13. AXES AT HPOS - Axes At Head Position Of The Branch

14. AXES AT TPOS - Axes At Tail Position Of The Branch

15. NEX TUBI - Asking For Tube Being On The Component

16. Q ITLE - To Display The Length Of The Tube Between Two Components

17. Q HREF - To Display The Head Reference Of A Branch

18. Q TREF - To Display The Tail Reference Of A Branch

19. Q DIR - To Display The Direction Of The Selected Component

20. CONN PH TO FIR MEM - Connect Branch Head To The First Member Of The Branch

21. CONN PT TO LAS MEM - Connect The Branch Tail To The Last Member Of The Branch

22. Q ORI - To Display The Orientation Of Selected Component

23. DIST - Giving The Distance Between Two Component Centers

24. CLEA (SPOOL) - Giving The Spool Distance Between Two Components

25. Q CATREF - To Display The Catalogue Reference At Component Level

26. CONN - Connect

27. FCONN - Force Connect

28. Q STYP - To Display The Component Selection Type

29. Q DTXR - To Display The Detail Text(Description Of The Component

30. DRAG BY E 1000 - Stretch The Component By East 1000 (Not Preferred)

31. Q MTXX - To Display The Material Of The Component

32. Q MODE - To Display The Mode Of Direction (For/Back)

33. FOR - To Set The Forward Mode

34. BACK - To Set The Backward Mode

35. FIRST MEM - To Navigate The First Member

36. LAST MEM - To Navigate The Last Member

37. FIRST FLAN - To Navigate The First Flange In Hierarchy

38. Q PARA - To Display The Parameters

39. Q ACONN - To Display The Arrive Connection Detail Of A Component

40. Q LCONN - To Display The Leave Connection Details Of A Component

41. DIR TOW NEX - Direction Towards The Next Component

42. Q REF - To Display Reference

43. INCL -  Include

44. OWN - Navigate Owner

45. GOTO OWN - Go To Owner Of The Selected Component

46. Q ABOP/LBOP - Details Of The Arrive/Leave Bop Of Pipe

47. Q ANGLE  - Details Of A Angle Of An Elbow

48. Q ATLE - Length Of First Tube Of A Branch

49. ATTYPE CCNN - Comment Attachment Without Dimension

50. ATTYPE CCCC - Comment Attachment With Dimension

51. ATTYPE XXXX - Atta For Setting The Isometric Limit

52. CH CE - Check Current Element (For Consistency Check)

53. DIR TOW NEXT ELBO - Align A Elbow With The Next Elbow

54. DIR TOW ID@ - Align The Elbow

55. EXTEND 100 START/END - Extend By 100 The Start/End Of A Cross Member

56. Q HCON/TCON - Details Of Head/Tail Connection Of A Branch

57. Q HDIR - Direction Of The Flow From The Branch Head

58. Q HPOS/TPOS - Details Of Head/Tail Possition Of A Branch

59. Q ISPE - Insulation Specification

60. ISPEC NULREF - For Removing Insulation

61. SPKBRK T - For Removing Insulation (Use In Case Fof Atta)

62. LOOSE - Used By Isodraft Where Flange Is Supplied Loose

64. MTOC DOTD - Mto Component Dotted With Dimension

65. MTOC DOTU - Mto Component Dotted With Out Dimension

66. MTOC OFF - Mto Component Off

67. NEX CONN - Next Connect

68. NEX THRO CE - Move The Current Componet To Next

69. ORI AND P3 IS TOW ID@ & DIR TOW ID@ - Aligning The 3rd P-Point Of A Tee Towards Next Elbow

70. Q P3 - Details Of P-Point P3 (In Case Of Tee Only)

71. Q PA/P1 - Details Of The P-Point 1

72. Q PL - Derails Of The P-Point 2

73. STEXT 'TEXT' - Setting The Comment Text

74. TCONN OPEN - Tail Connection Type Open (Ce Should Be Branch)

75. TDIR - Direction Of The Flow From The Branch Tail

76. ISPEC /W - To Give The Insulation

77. Q LBORE - To Query Leave Bore

78. Q TBORE - To Query The Tail Bore

79. THRO PH - Through Pipe Head

80. THRO PREV - Through Previous

81. THRO PT - Through Pipe Tail

82. Q TPOS - To Query Tail Position

83. Q HCON - To Query The Head Connection

84. Q TCON - To Query The Tail Connection

85. Q ACON - To Query Arrive Connection

86. Q LCON - To Query Leave Connection

87. ATTYPE FLOW - To Create Flow Direction Of Attachment

88. DIR N - Direction Of Component Towards North

89. BACK CONN - Backward Connection

90. MTOC UNSET - To Freeze The Component From Mto Report

Equipment Commands:

1. Q PARA - To Display The Parameters

2. Q CATREF - To Display The Catalogue Reference

3. Q SPRE - To Display The Specification Reference

4. Q CREF - To Display The Connection Reference

5. ADD CREF - To Add The Connection Reference

6. NEW BOX XLEN 100 YLEN 100 ZLEN 100 - To Create New Box With X-Length 100, Y-Length 100 & Z-Length 100.

7. NEW CYLI DIA HEI - To Create New Cylinder By Specifying Diameter And Height.

8. NEW SITE - To Create New Site

9. NEW ZONE - To Create New Zone

10. NEW EQUI - To Create New Equipment

11. NEW SUBE - To Create New Sub Equipment

12. NEW STRU - Create New Structural

13. NEW FRMW - To Create New Framework

14. NEW SBFR - To Create Sub Framework

15. NEW CYLI COPY PREV BY N 1000 - To Create New Cylinder From Previous Cylinder By North 1000.

16. Q POS IDP@ - For The Position Of Identified P-Point

17. AXES AT P1 - Axes At "P" Point 1

18. AXES AT P2 - Axes At "P" Point 2

19. NEXT AXES AT CE - Axes At Next Current Element In Hierarchy.

20. NEW VERT COPY PREV - Copying The Previous Vertex

21. DELETE VERT - To Delete The Vertex

22. MARK WITH (NAM) ALL NOZZ FOR CE - To Mark Nozzle Name.

23. Q LEVEL - To Query The Current Element Level.

Structural Commands:

1.   AXES AT CE - Axes At Current Element

2.   Q CUTL - Cut Length

3.   Q BANG - To Display The Beta Angle

4.   Q POSS WRT /* - To Display The Start Position Wrt World

5.   Q POSE WRT /* - To Display The End Position Wrt World

6.   Q ORI - To Display The Orientation

7.   Q POS WRT /* - To Display The Position Wrt World

9.   EXT END 300 - To Extend The End By 300

10. Q NAME - To Display The Name

11. NAME /NEW NAME - To Rename The Old Name

12. Q CE - Display The Current Element

13. Q DESC - To Display The Grid Mark & Also Change The Grid Mark

14. MARK WITH (DESC) ALL SCTN FOR CE - To Display All the Grid Markings

15. Q JUS - To Display The Steel Justification

16.  UNLOCK ALL - To Unlock

17.  AXES AT POSE - Axes At End Position

18.  AXES AT POSS - Axes At Start Position

19.  CTYE - Connection Type At End

20.  CTYS - Connection Type At Start

21.  DESP - Design Parameter

22.  DRNE - Cutting Plane Direction At End

23.  DRNS - Cutting Plane Direction At Start

24.  EREEL - End Release

25.  JLIN - Joint Line

26.  JOLE - Joint Reference At End

27.  JOLS - Joint Reference At Start

28.  JUSLINE / JUSL - Justification Line

29.  NPOS - Node Position

30.  SREL - Start Release

31.  ZDIS - Distance Along Z-Axis Of Owning Section

32.  JUSLINE TOS - To Match The Top Of The Structure With The Existing Or Selected Structure

32.  JUSLINE BOS - To Match The Bottom Of The Structure With the Existing Or Selected Structure